Super Titanium Base Coat.
INTRODUCTION.
The Titanium base coat has High strength and the Economics of cement based crystalline silica mixed 2packed system. Super titanium base coat is a shrinkage-controlled grout which has been specially designed for multipurpose engineering work, Titanium base coat is specially designed for maximum strength, minimized shrinkage and extend the working life and etc. its generally used as the under coat of Titanium paste for uneven floors & walls.
WHERE TO USE
Cement & Concrete floor leveling.
Spend your time generating new ideas. You don't have to think of implementing anymore.
Under Coat for Titanium floor leveling.
Spend your time generating new ideas. You don't have to think of implementing anymore.
Bedding repair
Spend your time generating new ideas. You don't have to think of implementing anymore.
Concrete gap filling
Spend your time generating new ideas. You don't have to think of implementing anymore.
Finishing and repair precast panel, Beam and column
Spend your time generating new ideas. You don't have to think of implementing anymore.
PREPARATION AND MIXING
Surface must be clean and free from dust and oil.Add 2L base coat polymer for 5kg base coat powder to prepare base coat mixer. (mixing ratio could be change depending on the surface condition.) Mechanical mixing is necessary for it. ( A Slow speed around 400 rpm heavy duty electrical drill with a wing type is recommended) Should be mixed for about 5 minutes. Recommended to use putty trowel for application.
COVERAGE
A 35 kg pack will provide a coverage area of sqft ,when using a 1 coat application. This will depend on the surface.
SANDING SURFACE
Before Applying super titanium paste, need to be sand with 120gauge sand paper to obtain level the surface.
SAFETY INSTRUCTIONS
It is necessary to wear a pair of gloves and a mask when sanding. Wash thoroughly if it comes in to contact with the skin. Contact a doctor immediately if it comes in contact with eyes and causes irritation.
